Undercarriage wear accounts for 30 to 50% of a tracked machine's total lifetime maintenance cost, which is why fleet managers track it as a budgeted cost-per-hour line, not an unplanned repair. Tuffex stocks 365 heavy equipment undercarriage parts for excavators and other tracked equipment used in mining, infrastructure, and construction, matched to machine make and model.
Undercarriage components are what let a tracked (crawler) machine move and carry its own weight: the chains, rollers, idlers, and sprockets that form a closed steel loop under the machine and bear its full load against dirt, rock, and mud, hour after hour. Crawler undercarriage covers everything from the chain itself to the drive components that power it.
Tuffex's undercarriage spare parts span the full wear system, grouped below by component type.
The track chain, or track link assembly, is the closed loop of pinned steel links the machine rides on, whether for an excavator or a dozer. Pitch and section count must match the OEM machine exactly. Tuffex stocks track chain assemblies and track link fitments, with price varying by pitch, section count, and brand tier.
The track shoe assembly is the plate bolted to the outside of each link that makes ground contact. Available widths include 450mm, 560mm, 600mm, 650mm, and 700mm, with single, double, and triple-grouser configurations selected to match the ground type. These are also referred to as grouser plates or track cleats.
Bottom (track) rollers carry the machine's full weight onto the chain and are available as single flange or double flange. Top (carrier) rollers support the chain's return run as a complete carrier roller assembly.
The idler assembly sits at the front and sometimes the rear of the track frame, guiding the chain and maintaining track tension. Idlers are stocked for major OEM brands and work together with rollers to keep the chain aligned.
The sprocket is the only powered part of the undercarriage; its teeth drive the chain. Segment groups let a fleet replace just the toothed wear surface on dozers, without swapping the full sprocket hub, and are commonly bought alongside chains and sprockets as a matched set.
Whether sourcing replacement parts or aftermarket undercarriage parts, a few factors decide fit and value.
Confirm by machine make and model. Sprocket tooth count, roller flange type, and chain pitch must match precisely. Where available, the equivalent OEM part number can also be used for cross-reference.
Track slip, a hooked sprocket tooth profile, flat spots on a roller, chain sag, or a machine that won't track straight are all indicators that it's time to inspect or replace. Knowing when to replace track chain components — ideally against a regular undercarriage inspection checklist — limits how far the wear spreads.
The OEM vs aftermarket choice comes down to three tiers: OEM, premium aftermarket brands like Berco and ITM, or value aftermarket (Tuffex), each trading price against durability differently.
Berco and ITM warranty terms carry 12 months/2,000 hours on rollers, idlers, shoes, and chains, and 6 months/1,000 hours on sprockets and segment groups. Tuffex-brand parts carry a 6 months/1,000 hours warranty across the range; coverage differs by brand tier and part type.
Chain and sprocket are usually replaced together, since a new chain wears rapidly against old sprocket teeth. Sealed and lubricated track chain designs reduce this wear by keeping grit out of the pin-and-bushing joints, extending the interval between matched-wear replacements.
Tuffex stocks three brand tiers across the undercarriage range.
Berco undercarriage parts are available across carrier rollers, idler assemblies, segment groups, sprockets, track link assemblies, track rollers, and track shoes. Tuffex stocks 114 active Berco products in this category.
Tuffex stocks 93 active ITM undercarriage products across carrier rollers, idler assemblies, segment groups, sprockets, track link assemblies, track rollers, and track shoes, including track chains alongside rollers, idlers, and sprockets.
Tuffex undercarriage is the company's own range, with 158 active products across carrier rollers, idler assemblies, segment groups, sprockets, track link assemblies, track rollers, and track shoes. These cover a broad range of excavator and dozer fitments.
Tuffex offers undercarriage parts across multiple machine makes and models, with product-level warranty information provided for the active range. Buyers should confirm fitment using the machine make, model, and, where available, the equivalent OEM part number.